Model Number: R1V
Brand Name: JPCI, ULTIMHEAT
Key Specifications/Special Features:
Type R1V paddle flow switches, reed switch contact, external brass bodyMain features:General application in flow detection.Recommended mounting position is on horizontal pipes, but can be mounted in any position.For liquids flow detection on dia. 15 to 100mm pipes.Body and union nut in brass for improved mechanical strength and pressure resistance.Connection box with terminal block or connectors, and detection point adjustment screw
Functional principle:Balanced magnetic paddle mounted perpendicular to the flow and activating a reed switch through the wall.
The return of the paddle is by made by magnetic action, without spring.
No seal or liquid can pass between the piping system and the electrical contact.
Usable for industrial applications in non-corrosive liquids.
Must not to be used for liquids containing magnetic particles or high viscosity liquids, which block the movement of the pallet.
Adjustment:- By cleaving the paddle
- Fine adjustment by screw driver on internal dial
Paddle shaft:Titanium, providing an outstanding corrosion resistance, and improved mechanical live
Main housing material:Brass
Paddle:Polypropylene, 15 mm width, with 4 sections, numbered 1 to 4, can be cleaved for adjustment to pipe size
Pipe mounting:Nickel plated brass union nut, BSPP, mounting on BSPP male thread with gasket.
Recommended torque:10±1 Nm
Gasket:NBR
Electrical rating:Max 1A, Max 70W, Max 250V, resistive load. Use on inductive circuits reduces electrical rating. We recommend to protect the reed switch with contact protection device when used in inductive loads
Electric contact type:Normally open, closes by flow rise
Liquids compatibility:For use with clean water and liquids without magnetic particles and without chemical incompatibility with brass, PPO and titanium
Nominal pressure at 20°C:2,5 MPa (PN25)
Liquids temperature range:5 to 100°C (Do not withstand water freezing inside pipe)
Ambient temperature range:5 to 80°C
Ingress protection:IP65
Calibration tolerances:+/-15% (on paddle operating force at end of paddle 1)
Electrical connection:Standard:
IP64 connection box, with screw terminal connection block, M16x1.5 ISO cable gland
Options:
- Connection box with EN17530-803-A (DIN43650-A) connector
Calibration (Calibration force ±15%, measured at end of paddle N°1)
|
Waterproof connection box with M16x1.5 cable gland |
Waterproof connection box with 4 pins, M12x1 IEC947-5-2 connector
|
Waterproof connection box with DIN 43650-A connector |
Low span end: 3gr |
R1V636680G35N00C |
R1V636680G35N00L |
R1V636680G35N00D |
Middle span:7gr |
R1V676680G35N00C |
R1V676680G35N00L |
R1V676680G35N00D |
High span end:14 gr |
R1V6E6680G35N00C |
R1V6E6680G35N00L |
R1V6E6680G35N00D |